Platinum Spot 5R™
©Elation Professional, Los Angeles Ca. 16 www.ElationLighting.com
B. Once at “Information” tap the “Enter” button anduse the “Up” or “Down”
buttons to toggle to “Time Information”
C. Once at “Time Information” us either the “Up” or “Down” buttons to toggle to
“L-Timer Password” and tap the “Enter” button. Then use the “Up” or “Down”
buttons to enter the reset pass code, “038” and tap the “Enter” button once
again. The display will automatically revert to “L-Timer Password,” next
toggle down to “Clear Lamp Time”
D. Once at “Clear Lamp Time” tap the enter button and select “ON.” The lamp
timer has now been reset, use the “MODE/ESC” button to exit the menu and
return to the home screen.
Lamp Optimization
Unlike traditional discharge lamps the Platinum 5R lamp does not require optimization. The
lamp orientation and optimization procedure has been preset during the manufacturing
process of the lamp.
Please remember that a MSD Platinum 5R lamp is not a hot-restrike lamp therefore, you
must wait approximately 15 minutes before you can attempt to strike the lamp once it has
been turned off.
To Next Page
Loading...
