Elation PLATINUM FLX - Program Recording Management

www.elationlighting.com
29 PLATINUM FLX™ User Manual
EDIT PROGRAM – Record Controller – Working With Built-In Program [continued]
4. Program Selection for Edit Program
T-;B;9J[Edit Program”.
T+H;IIENTER to confirm.
T-;B;9J“Edit Program”.
T+H;IIENTER to confirm.
T-elect the desired program. With this function you can edit specific scenes into a
specific program.
T+H;IIENTER to confirm.
T+H;IIMODE/ESC in order to return to the main menu.
5. Automatic Scene Recording
T-;B;9J“Edit Program”.
T+H;IIENTER to confirm.
T-;B;9J“Edit Scenes”.
T-;B;9Jdesired scene numbers. A maximum of 250 scenes can be programmed.
T+H;IIENTER to confirm.
T+H;IIMODE/ESC in order to return to the main menu.
Example:
Program 2 includes scenes: 10, 11, 12, & 13
Program 4 includes scenes: 8, 9, & 10
Program 6 includes scenes: 12, 13, 14, & 15
Auto Pro Part 1 is Program 2
Auto Pro Part 2 is Program 3
Auto Pro Part 3 is Program 6
The 3 Slave groups run the Auto Program in certain time segments, as shown in the following picture: