19
Loading
Take care when loading dishes to ensure that the water will reach all areas, particularly the
cup racks. If there are any items blocking the spray arms’ paths or the wash water, then the
performance will be ineffective.
Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter
from becoming clogged.
If the pots and pans have baked-on food residue that is extremely hard to remove, we
recommend that they are soaked before being washed. This will eliminate the need for extra
wash cycles.
How to load the lower rack
In some models, the tines on the lower rack can be folded down so large items like pots and
pans can be placed flat on the basket.
We recommend that you place the most difficult-to-clean items on the lower rack: pots, pans,
lids, serving dishes and bowls.
Place serving dishes and lids on the sides of the racks to avoid blocking the rotation of the top
spray arm.
The cutlery basket can be halved as shown in
Fig. 5, so that you can use just one section when
the cutlery load is light. This also makes space for
additional pots and pans.
Place cutlery in the cutlery basket with the
handles at the bottom. If you are using the anti-
nesting grids, place spoons individually into
the appropriate slots. Place long utensils in the
horizontal position at the front of the upper rack.
Place knives and other utensils with sharp points
in the basket with their points down, or in a
horizontal position.
Fig. 5 Halving the cutlery basket
To Next Page
Loading...
