7
Installation instructions
If the electrical socket to which the appliance must be connected is not appropriate for the plug,
replace the whole cable rather than using adaptors, as adaptors could cause overheating and
burns.
Important!
The dishwasher plug must be accessible even when the appliance is installed as a built-in unit so that
maintenance can be done safely.
If a fault occurs
If the dishwasher malfunctions, turn off the water supply to the appliance and disconnect the
plug from the wall socket. Refer to the ‘Fault codes’ and ‘Troubleshooting’ sections. If you cannot
solve the problem, contact a Fisher & Paykel Authorised Service Centre.
Specifications
Model details
Model Colour
DW60CSW1 / DW60CDW2 / DW60CRW2 White
DW60CSX1 / DW60CDX2 / DW60CRX2 Stainless steel
Technical Data
Width 600 mm
Depth 600 mm
Height 850 mm
Capacity 12 standard place settings
Mains water pressure 0.03 – 1 MPa (4.35 - 145 psi)
Power voltage 220-240 V - 50 Hz
Maximum current intensity 10 A
Total absorbed power 1950 W
2100 W (DW60CR models only )
To Next Page
Loading...
