30
Stud
Fig. 2.9
TILTING GRILL (SOME MODELS ONLY)
•
The grill is secured to the rear wall of the oven on a hinge system that allows it to be
lowered to allow proper access when cleaning the oven ceiling (g. 2.9).
• To lower the grill element: use a at-head screwdriver or a small coin to loosen the
element xing screw (g. 2.8).
• When you have nished cleaning the oven ceiling, raise the grill element and screw the
element xing screw back onto the stud. Make sure that the xing screw is tightened
and the element is held securely in place.
• The grill element itself is self-cleaning.
Fixing screw
Fig. 2.8
To Next Page
Loading...
