39
CLEANING THE DOOR GLASS – SIDE-OPENING MODELS
1 Make sure that one person is holding
the door firmly in place while the
other is refitting the inner pane.
To refit the inner pane
2 Check the rubber pads are in place.
D
Rubber pads
3 Check the pane is the right way
around. You should be able to
read any wording that may be on
the pane.
5 Replace the seal.
4 Insert the pane into the slide guides
and gently slide it to the bottom
retainers. Forcing the glass may
damage the hinges.
Seal
To Next Page
Loading...
