To Next PageTo Next Page
Need help?Do you have a question about the elco Trigon XL Series and is the answer not in the manual?
Details the intended use of the boiler and operational limits.
Lists European and national standards applicable to installation and operation.
Provides crucial safety and operational guidance for technicians.
Explains the symbols and information found on the boiler's data plate.
Describes how the boiler functions and its control unit capabilities.
Identifies and illustrates the main components of the TRIGON XL boiler.
Details energy-related product information according to EU directives.
Provides detailed dimensional drawings and specifications for different models.
Lists the components included in the standard boiler delivery package.
Lists optional accessories available for order and their benefits.
Explains how to transport the boiler, including weight and dimensions of parts.
Provides step-by-step instructions for removing the boiler casing.
Crucial safety warnings and prerequisites before installing the boiler.
Covers positioning requirements, clearances, and leveling the boiler.
Explains how to make hydraulic, condensate, and gas connections.
Details regulations and data for flue gas system installation.
Explains air intake connection for room-sealed installations.
Details flue gas system connection requirements and safety features.
Covers flue gas system dimensioning and pressure classes.
Explains how to make electrical connections to the boiler safely.
Provides a detailed wiring diagram and connection table.
Covers filling, water quality, and pressure requirements.
Explains condensate neutralisation systems and their types.
Details checks for gas supply connection and type.
Checks flue and air intake systems for compliance and proper connection.
Instructions on filling the syphon and checking connections.
Step-by-step guide for initial boiler startup procedures.
Procedures for checking and adjusting combustion at different loads.
Instructions for adjusting the flue gas valve for optimal performance.
Methods for checking water flow rate using AT and Ap measurements.
How to test safety sensors and electrodes for proper operation.
Procedures for checking gas connections for leaks.
Steps for safely shutting down the boiler for extended periods.
A template for recording commissioning data and checks.
Explains the function of various buttons and controls on the boiler.
Details how to read the display and navigate programming menus.
Summarizes key functions like setting temperature, DHW operation, and heating modes.
Lists essential maintenance activities to be performed annually.
Step-by-step guide for replacing ignition and ionisation electrodes.
Instructions for cleaning the condensate tray.
Procedures for cleaning and refilling the syphon.
Steps to clean the dirt collector and its syphon.
How to inspect the combustion chamber via the sight glass.
Checking water parameters after initial operation.
Verifying water pressure, quality, and flow rate.
Verifying the functionality and settings of connected safety devices.
A log for recording maintenance tasks and findings.
General