9-9
HOW TO USE YOUR MOTORHOME’S EQUIPMENT
Failure display
Your refrigerator will indicate a malfunction by flashing of the failure indicator LED (4) and one of the
other display lights. The chart below shows the meaning of these.
Display: Failure:
LED is flashing 230V mode: “230V” not available or voltage too low
LED is flashing 12V mode: “12V” not available or voltage too low
LED is flashing GAS/Auto mode: Flame not ignited
All temperature setting Temperature sensor defective, refrigerator work
LEDs are flashing on mid temperature setting
LED + all temperature 230V - Heating element defective
LED + all temperature 12V - Heating element defective
setting LEDs are flashing
To Next Page
Loading...
