Eldes EPIR - Appendix; 4.1 Restoring default parameters; 4.2 ELDES ConfigTool configuration software; 4.3 Replacing back-up battery

38
4. Appendix
4.1 Restoring default parameters
-


4.2 ELDES CongTool conguration software





4.3 Replacing back-up battery
-
perature and frequency of mains power disruptions.
To change back-up battery, follow these steps:
1. Unplug power supply form mains power
 
3. Unplug power supply connector
 
5. Open ELDES EPIR enclosure
 
 
 
9. Repeat all steps in inverse order