Need help?Do you have a question about the Eldes ESIM384 and is the answer not in the manual?
General| Connectivity | GSM, Ethernet |
|---|---|
| GSM bands | 850/900/1800/1900 MHz |
| SIM card slots | 1 |
| Wired zones | 8 |
| Users | Up to 50 |
| Event log | Yes |
| Operating temperature | -10°C to +50°C |
| Backup battery | Yes |
| Wireless Sensors Support | Yes |
| Remote Control | Yes |
| Mobile App Support | Yes |
| Siren Output | Yes |
| Power Supply | 12V DC |
| Compatibility | Eldes ecosystem |
Outlines default system settings and methods for parameter configuration.
Explains the main unit's components, LEDs, and connector functions.
Provides visual guides for connecting various system components and devices.
Details how to configure and control the system using SMS commands.
Explains system configuration and control using the EKB2 LCD keypad interface.
Describes configuration and control via EKB3/EKB3W/EWKB4 LED keypads.
Introduces the software for system configuration via USB, GPRS, or Ethernet.
Details how to establish a remote connection for system configuration.
Explains the process of configuring the system using a USB cable.
Instructions for adding and removing iButton keys for system access.
Details how to arm/disarm the system using free phone calls.
Explains how to arm/disarm the system using SMS commands.
Describes arming/disarming using the EKB2 keypad with codes.
Details arming/disarming via EKB3 keypad with codes.
Explains arming/disarming with EKB3W/EWKB4 keypads.
Guide to arming the system using EKB3W/EWKB4 keypads.
Instructions to disarm the system using EKB3W/EWKB4 keypads.
Details how to arm/disarm the system using an iButton key.
Explains arming/disarming using EWK1/EWK2 wireless keyfobs.
Defines various zone types and their behaviors (e.g., Instant, Delay, Fire).
How to bypass violated zones to allow system arming.
How to manage call and SMS notifications for alarms.
How to automate PGM outputs based on events or schedules.
Instructions for managing wireless devices by pairing, removing, or replacing them.
Introduction to the EWKB5 wireless touchpad interface and features.
Guide to configuring and controlling the system via EWKB5 touchpad.
Step-by-step instructions to arm the system using EWKB5 touchpad.
Guide to disarm the system and turn off the alarm using EWKB5.
Instructions for bypassing zones using EWKB5 touchpad.
Explains fault messages displayed on the EWKB5 touchpad.
How the system monitors backup battery status and sends notifications.
How the system monitors GSM connection status and sends notifications.
Configuring temperature thresholds and receiving SMS alerts.
Details the system's communication methods and protocols with monitoring stations.
Configuration steps for GPRS/Ethernet data transmission to monitoring stations.
Features and functionality of the EKB2 LCD keypad.
Common problems and their potential solutions for the system.
Instructions for updating system firmware using a USB cable.
Process for remotely updating system firmware over GPRS.
To Next Page
