Eldes ESIM384 - System configuration by USB cable

31
31
EN
ESIM384 Installation and Conguration Manual v1.1
• Running TCP/IP server on ELDES Conguration software (advanced). The connection can be established on the system via GPRS
network or Ethernet using ELAN3-ALARM communicator.
• Direct connection via Ethernet using ELAN3-ALARM communicator.
In order to start using the remote conguration feature, please run the step-by-step wizard and follow the steps provided in the start page
of ELDES Conguration software. Please, note that based on the selected method, it might be necessary to send an SMS text message to
the system’s phone number in order to initiate the remote connection. By following the steps you will be instructed on what text must be
sent to the system’s phone number in such case.
5.4.2. Ending the Remote Connection Session
After the remote system conguration is complete, use one of the following methods to end the conguration process:
• Click Disconnect or Stop button and close ELDES Conguration software.
• The session will automatically expire in 20 minutes. Before the last 5 minutes, the software will oer the user to extend the session for
another 20 minutes.
• Alternatively, the connection with the server can be terminated at any time by sending an SMS text message.
Terminate the
connection with server
SMS
SMS text message content:
ssss_ENDCONFIG
Value: ssss – 4-digit SMS password.
Example: 1111_ENDCONFIG
Once the session is expired or terminated, the system will reply with an SMS text message conrming the end of the session.
5.5. System conguration by USB cable
In order to congure the system by USB cable, the user must plug the specied cable into personal computer’s USB port and launch the
pre-installed ELDES Conguration software. Conguration by USB cable and ELDES Conguration software does not require the external
power supply to be connected to the device. However, the device will NOT fully function when USB-powered .The user will be able to carry
out some major part of system’s conguration, with the exception of those functions, which are strictly related to GSM modem (disabled
during the selected conguration period) or associated with the Wireless connectivity (also disabled).