Eldes ESIM384 - Indication by Ews2 - Wireless Outdoor Siren Indicators

103
103
EN
ESIM384 Installation and Conguration Manual v1.1
20.4. Indication by EWS2 - Wireless Outdoor Siren Indicators
When enabled, the built-in LED indicators of EWS2 wireless outdoor siren will ash during the alarm. To enable/disable this feature, please
refer to the following conguration methods.
Enable EWS2 LED
indication
EKB2
Menu path:
OK → iiii → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS → OK → EWS2 LED → OK →
ENABLE → OK
Value: iiii – 4-digit installer code.
EKB3/
EKB3W/
EWKB4
Enter parameter 88 and parameter status value:
88 1 #
Example: 881#
ELDES
Cong-
uration
software
This operation may be carried out from the PC using the ELDES Conguration software.
Disable EWS2 LED
indication
EKB2
Menu path:
OK → iiii → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS → OK → EWS2 LED → OK →
DISABLE → OK
Value: iiii – 4-digit installer code.
EKB3/
EKB3W/
EWKB4
Enter parameter 88 and parameter status value:
88 0 #
Example: 880#
ELDES
Cong-
uration
software
This operation may be carried out from the PC using the ELDES Conguration software.