Eldes ESIM384 - 39. Ekb3;Ekb3 W;Ewkb4 Commands - Appendix 2; 40 SMS Commands

191
191
EN
ESIM384 Installation and Conguration Manual v1.1
COMMAND
DEFINITION
CODE
COMMAND
VALUE
EXAMPLE
Enable/ disable EWS2
LED indication
881# / 880# 881# / 880#
Set primary tem-
perature sensor
89 ts # ts – temperature sensor slot,
range - [01... 08].
8903#
Enable EWS3 LED indication Burglary/24-hour/tamper
alarm LED: 941#
Fire alarm LED:931#
931#
Disable EWS3 LED indication Burglary/24-hour/tamper
alarm LED: 940#
Fire alarm LED:930#
940#
40. SMS COMMANDS - APPENDIX 3
THEME SMS EXAMPLE
SMS PASSWORD:
Set SMS password 0000 PSW 1111
USER PHONE NUMBERS:
Add user phone number 1111 NR1:+4417091111111
View user phone number 1111 HELPNR
Delete user phone number 1111 NR2:DEL
Enable system control from any phone number 1111 STR:ON
Disable system control from any phone number 1111 STR:OFF
DATE AND TIME:
Set date and time 1111 2014.03.16 14:33
iBUTTON KEYS:
Enable allow adding new iButton keys mode 1111 IBPROG:ON
Disable allow adding new Ibutton keys mode 1111 IBPROG:OFF
Remove all iButton keys from the system 1111 RESETIB
ARMING AND DISARMING:
Arm the system 1111 ARM1
Disarm the system 1111 DISARM1,2,4
EXIT AND ENTRY DELAY:
Set exit delay 1111 EXITDELAY:1,20;3,43
Set entry delay for delay zone 1111 ENTRYDELAY:1,25;54,14;12,20
ZONES:
Set zone name 1111 Z3:Door sensor triggered
View zone names 1111 STATUS
Disable zone 1111 Z13:OFF
Enable zone 1111 Z6:ON
ALARM INDICATIONS AND NOTIFICATIONS:
View violated zones 1111 INFO