Eldes ESIM384 - SMS PASSWORD AND INSTALLER CODE

32
32
EN
ESIM384 Installation and Conguration Manual v1.1
6. SMS PASSWORD AND INSTALLER CODE
For security reasons, the system uses the following type of password and code:
SMS password – 4-digit password used for system arming/disarming and conguration by SMS text messages. By default, SMS password is
0000, which MUST be changed!. SMS password is authorized to carry out the following:
• Access system conguration by SMS text messages.
• Arm/disarm partition.
• Activate/deactivate service mode.
• Set system date and time.
• Add/remove user phone numbers.
• Set SMS password.
• Turn ON/OFF PGM outputs.
• Restart system remotely.
Installer code – 4-digit password used for system conguration by EKB2/EKB3/EKB3W/EWKB4 keypad and ELDES Conguration soft-
ware. By default, installer code is 1470, which is highly recommended to change. Installer code is authorized to carry out the following:
• Access system conguration by keypad and ELDES Conguration software.
• Set installer code.
• Set master code.
• Activate/deactivate service mode.
• Set system date and time.
• Add/remove user phone numbers.
• Set SMS password.
• Restore system conguration to default.
• Clear tamper fault (if enabled).
Set SMS password
SMS
SMS text message content:
wwww_PSW_ssss
Value: wwww – 4-digit existing SMS password; ssss – 4-digit new SMS password; range –
[0001... 9999].
Example: 0000_PSW_1111
EKB2
Menu path:
OK → iiii → OK → PRIMARY SETTINGS → OK → SMS PASSWORD → OK → ssss → OK
Value: iiii – 4-digit installer code; ssss – 4-digit new SMS password; range – [0001... 9999].
EKB3/
EKB3W/
EWKB4
Enter parameter 14 and new SMS password:
14 ssss #
Value: ssss – 4-digit new SMS password; range – [0001... 9999].
Example: 141111#
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration software.
Set installer code
EKB2
Menu path:
OK → 1470 → OK → PRIMARY SETTINGS → OK → INSTALLER CODE → OK → iiii → OK
Value: iii – 4-digit new installer code; range – [0000... 9999].
EKB3/
EKB3W/
EWKB4
Enter parameter 16 and new installer code:
16 iiii #
Value: iiii – 4-digit new installer code; range – [0000... 9999].
Example: 162538#
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration software.