Eldes ESIM384 - 20 Wired Siren;Bell

100
100
EN
ESIM384 Installation and Conguration Manual v1.1
20. WIRED SIREN/BELL
When the system is in alarm state, the siren/bell will sound until the set time (by default – 1 minute) expires or until the system is disarmed.
To set the alarm duration, please refer to the following conguration methods.
Set alarm duration
SMS
SMS text message content:
ssss_SIREN:t
Value: ssss – 4-digit SMS password; t – alarm duration, range – [0... 5] minutes.
Example: 1111_SIREN:4
EKB2
Menu path:
OK → iiii → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS → OK → ALARM DURATION
→ OK → tt → OK
Value: iiii – 4-digit installer code; tt – alarm duration, range – [1... 10] minutes.
EKB3/
EKB3W/
EWKB4
Enter parameter 10 and alarm duration:
10 tt #
Value: tt – alarm duration, range – [00... 10] minutes.
Example: 1007#
ELDES
Cong-
uration
soft-
ware
This operation may be carried out from the PC using the ELDES Conguration software.
View alarm duration
SMS
SMS text message content:
ssss_SIREN
Value: ssss – 4-digit SMS password
Example: 1111_SIREN
EKB2
Menu path:
OK → iiii → OK → PRIMARY SETT INGS → OK → SIREN SETTINGS → OK → ALARM DURATION
Value: iiii – 4-digit installer code.
ELDES
Cong-
uration
soft-
ware
This operation may be carried out from the PC using the ELDES Conguration software.
For siren/bell wiring diagram, please refer to 2.3.3. Siren.
NOTE: The maximum supported alarm duration is 30 minutes that can be set up using ELDES Conguration software only. “0” value disables
the siren/bell.
NOTE: Due to battery power saving reasons, the wireless siren will sound for up to 6 minutes max. regardless of the set up alarm duration
value when it is longer than 6 minutes