Electra Hydrive - Battery Specifications and Assembly; Battery Product Specifications; Battery Assembly

ENGLISH
EN - 4 Battery
2.2 Product description and specifications
[P/N: 54C003]
1. Holder
2. Rear battery pack
3. Lock for rear battery pack
4. Key for rear battery pack
5. Socket for charge connector
6. Charge socket cover
7. Charge indicator
8. On / Off button
Technical data
Item Specification
Rated
voltage
36 V
Rated
capacity
8.6 Ah
Energy 309.6 Wh
Operating
temperature
14°F~122°F (-10°C~ +50°C)
80%RH
Storage
temperature
-4°F~140°F (-20°C~ +60°C) (<1 month)
-4°F~113°F (-20°C~ +45°C) (<3 month)
-4°F~68°F (-20°C~ +20°C) (<12 month)
Charging
temperature
32°F~113°F (0°C~ +45°C)
80%RH
X Do not allow the battery pack to suffer
physical impact, this may cause leakage of
gas inside the battery pack; the gas released
may cause irritation to the respiratory tract.
X If the battery pack is not used properly, it
may release gas which can cause irritation
and discomfort. If these symptoms are
experienced, move to fresh air immediately
and seek medical attention.
X Use only genuine Hydrive battery packs
with your Hydrive e-bike system to ensure
proper system performance.
X Only use genuine Hydrive battery chargers
or electric chargers that are approved for
your e-bike by the manufacturer. The use
of uncertified chargers may result in death
or severe injuries.
X Do not use the battery as a handle to move
or lift the bicycle. If you lift the bicycle from
the battery pack, it will damage the battery
pack.
X Do not use or store the battery charger in
locations that are easily accessible to
children.
X Please carefully read all safety warning
instructions in the manuals included with
the e-bike and e-bike systems.
596221_Electra_Hydrive_E-bike_Owner's manual_Battery_EN.indd 4 18-Apr-19 11:08:23
24