Transporting your Scooter
To transport your scooter you will need to dismantle it. Follow these instructions. Do not attempt this unless
you ar
e capable of lifting 14 kg or 30 lbs. You are advised to wear gloves.
1. Lift off the front basket
2. Remove the seat by lifting it off the seat post while lifting the seat swivel lever. A small rotation is
sometimes necessary to free the seat.
3. Release the battery catch, remove the battery box and stow carefully in the vehicle.
4. Lower the tiller to its horizontal position and secure using the knurled knob
5. Lock the tiller steering.
6.
Push down the chassis
release catch, (see picture)
7. Gently separate the front
chassis from the rear, by lifting
the front part by the seat post
and taking care not to contact
the seat post top. (see pictur
e)
8. Stow the chassis front and
r
ear par
ts and seat
into the
boot of the vehicle using the lift
handles pr
ovided.
9. Ensure that all parts are secure so that they cannot move while diriving.
12 Eco 3 & 4 Scooter Owner’s Manual & Service Record
Warning! Dismantling the scooter involves lifting and handling heavy parts. Weights are given in the
T
echnical Specification; consider if you need help in handling parts before you try to lift them. The Eco
Scooter has been designed to be easily dismanted and stowed in a car. Contact your dealer for advice on
how best to transport you scooter in your vehicle
Warning! Pinching or Crushing. Be car
eful to avoid being pinched or having your hands crushed when
lifting or handling parts. Wear gloves whenever possible.
Warning! This vehicle is not suitable for use as a seat for an occupant in a motor vehicle.
Warning! Do not lift the rear chassis with the batteries still fitted - back injury may result!
To Next Page