Need help?Do you have a question about the ElectrIQ 500CAM and is the answer not in the manual?
General| Brand | ElectrIQ |
|---|---|
| Model | 500CAM |
| Category | Dash Cameras |
| Language | English |
Details the operational functions of various buttons on the device.
Controls device power on/off. Requires connection to a power source.
Captures still images while in video mode.
Resets the device in case of system crash.
Accesses camera menus. Recording must be stopped first.
Manually protects current video recording from loop overwriting.
Switches between video and playback modes. Not active during recording.
Controls LCD display, navigates menus, and rewinds video.
Starts/stops recording, plays/pauses video, confirms menu selection.
Controls sound recording, navigates menus, and fast-forwards video.
Indicates recording status, standby, or device power status.
Indicates battery charging status or completion.
Instructions for installing the Micro SD card into the device.
Instructions for installing the GPS module for the 500GCAM model.
Details on connecting the device to the vehicle's power supply.
Explains the Gravity Sensor's role in detecting and protecting files during collisions.
Describes the default recording mode screen and recording indicator.
Guides on accessing and changing various device settings like resolution and exposure.
Explains how to adjust white balance for different lighting conditions.
Instructions to turn on Wide Dynamic Range for low light usage.
Details on adjusting motion detection sensitivity.
Details on adjusting G Sensor sensitivity.
Option to turn the built-in microphone on or off.
Option to turn the date stamp on or off for videos/images.
How to input and display a license plate number on videos.
Option to turn the license plate stamp on or off for videos.
Allows rotating the image display if the camera is used upside down.
Covers settings like Date/Time, Power On/Off Delay, Auto Power Off, and Screen Savers.
Selects whether device buttons are illuminated, with an auto option.
Settings for TV output mode (NTSC/PAL) and frequency selection.
Allows selection of the user interface language.
Options to format the memory card or reset the device to default settings.
Displays the currently installed software version of the device.
Steps to connect the device to a TV or monitor via HDMI.
Steps to connect the device to a computer via USB to access files.
Information on using the DVR player software installed on the Micro SD card.
Detailed technical specifications of the camera device.
Guidance on responsible disposal of the product as electronic waste.
Contact information and office hours for technical assistance and inquiries.
To Next Page