To Next PageTo Next PageWhat to do if front louvres of ElectrIQ CD12LE do not open?
Check if anything is blocking the louvre. Try gently moving the louvres up and down while the unit is off. If it still fails, return the unit to service center.
Why is my ElectrIQ CD12LE not extracting water?
Your ElectrIQ Dehumidifier might not be extracting water for several reasons. Make sure the humidity level setting is lower than the current humidity in the room. Also, check if the temperature is too low for efficient water extraction; if so, increase the room temperature or reposition the unit. Finally, ensure that no intake grill or outlet is blocked and that the unit is at least 20 cm away from walls.
Why ElectrIQ CD12LE Dehumidifier defrost light on and unit stops regularly?
If the defrost light is on and your ElectrIQ dehumidifier stops regularly, it's likely defrosting. Allow the unit to automatically defrost itself. If this happens too often, increase the room temperature.
What does the tank full red light mean on my ElectrIQ Dehumidifier?
The tank full red light indicates that the water tank is full or not correctly positioned. Empty the tank and ensure it is properly placed back in the unit.
Why does my ElectrIQ Dehumidifier stop regularly and show the defrost light?
The defrost light indicates that the unit is automatically defrosting. Allow the unit to complete this process. If this occurs frequently, try increasing the room temperature.
Why is my ElectrIQ CD12LE Dehumidifier producing hot or cold air?
The ElectrIQ Dehumidifier produces cold air while dehumidifying as it freezes humid air. During the defrost cycle, it will produce hot, dry air.
What to do if my ElectrIQ CD12LE Dehumidifier does not operate?
First, ensure the dehumidifier is properly plugged into the socket and that the socket is switched on. Also, check if the tank full indicator is red. If it is, empty the tank, check the float, and ensure the tank is correctly inserted.
How to reduce noise from my ElectrIQ CD12LE Dehumidifier?
To reduce noise, ensure your ElectrIQ Dehumidifier is placed on a flat, horizontal surface. If possible, use a soft surface like rubber or carpet to prevent vibrations. Also, ensure that the filters are not clogged and are serviced regularly as per the user manual.
How to fix ElectrIQ CD12LE airflow that seems weak?
If the airflow of your ElectrIQ dehumidifier seems weak, the filter may be dirty or clogged. Service the filters regularly as per the user manual.
What to do if ElectrIQ Dehumidifier is noisy during operation?
If your ElectrIQ dehumidifier is noisy, ensure it's placed on a flat, horizontal surface. Also, a clogged filter can cause noise, so service the filters regularly as per the user manual.
General| Extraction Rate | 12 litres per day |
|---|---|
| Water Tank Capacity | 2 Litres |
| Noise Level | 42 dB |
| Operating Temperatures | 5°C to 35°C |
| Refrigerant | R290 |
| Features | Continuous Drainage Option |
Details electrical connection, power cord safety, tilting, and compressor restart procedures.
Summarizes POWER, MODE, HUMIDITY INDICATOR, and the 2-digit display functions.
Details the operation of oscillation, UV light, timer, and defrost functions.
Describes SMART, HIGH, and LAUNDRY modes for efficient dehumidification.
Ensures proper air circulation by recommending clearance and central placement.
Instructions for cleaning the unit's exterior, filters, and grilles with mild detergent.
Troubleshooting for issues like full tank, displacement, or low room temperature.
Guides on interpreting error codes (E1-E6) and general malfunctions.
