To Next PageTo Next PageWhat to do if front louvres of ElectrIQ Dehumidifier do not open?
Check if anything is blocking the louvre. Try gently moving the louvres up and down while the unit is off. If it still fails, return the unit to service center.
Why is my ElectrIQ Dehumidifier not extracting water?
Your ElectrIQ Dehumidifier might not be extracting water for several reasons. Make sure the humidity level setting is lower than the current humidity in the room. Also, check if the temperature is too low for efficient water extraction; if so, increase the room temperature or reposition the unit. Finally, ensure that no intake grill or outlet is blocked and that the unit is at least 20 cm away from walls.
Why ElectrIQ CD20LE defrost light on and unit stops regularly?
If the defrost light is on and your ElectrIQ dehumidifier stops regularly, it's likely defrosting. Allow the unit to automatically defrost itself. If this happens too often, increase the room temperature.
What does the tank full red light mean on my ElectrIQ Dehumidifier?
The tank full red light indicates that the water tank is full or not correctly positioned. Empty the tank and ensure it is properly placed back in the unit.
Why does my ElectrIQ Dehumidifier stop regularly and show the defrost light?
The defrost light indicates that the unit is automatically defrosting. Allow the unit to complete this process. If this occurs frequently, try increasing the room temperature.
What to do if my ElectrIQ CD20LE Dehumidifier does not operate?
First, ensure the dehumidifier is properly plugged into the socket and that the socket is switched on. Also, check if the tank full indicator is red. If it is, empty the tank, check the float, and ensure the tank is correctly inserted.
Why is ElectrIQ Dehumidifier producing hot or cold air?
When the ElectrIQ dehumidifier is in dehumidifying mode, it absorbs humid air and freezes it to reduce humidity. During the cold cycle, it emits cold air. During the defrost cycle, it emits hot, dry air.
What to do if ElectrIQ Dehumidifier front louvres do not open?
If the front louvres of your ElectrIQ dehumidifier do not open, the louvre motor might be blocked. Check for any obstructions. With the unit off, gently try moving the louvres up and down. If it still fails, return the unit to a service center.
What to do if ElectrIQ CD20LE is noisy during operation?
If your ElectrIQ dehumidifier is noisy, ensure it's placed on a flat, horizontal surface. Also, a clogged filter can cause noise, so service the filters regularly as per the user manual.
Why is my ElectrIQ CD20LE noisy during operation?
If your ElectrIQ Dehumidifier is making a lot of noise, it might be because it's on an uneven surface. Place it on a flat, horizontal surface. Another cause could be a clogged filter, so please service the filters regularly as per user manual.
General| Brand | ElectrIQ |
|---|---|
| Model | CD20LE |
| Category | Dehumidifier |
| Language | English |
Tips for saving energy and protecting the unit during operation, covering airflow, filter maintenance, and placement.
Instructions for setting the unit to high or low dehumidifying modes using POWER and MODE buttons.
Guide on setting specific humidity levels using POWER, MODE, and HUMIDITY buttons.
Explanation of the function of each button on the control panel, including POWER, MODE, TIMER, HUMIDITY, DRYING, SWING, LOCK, IONISER.
Description of various icons and indicators displayed on the unit's LCD screen for different modes and statuses.
Instructions for setting the unit to switch off or turn on automatically after a specified time duration.
Details on Auto, High, and Low dehumidifying modes, including fan speed adjustments based on room humidity.
Guide to using the air purifier mode and the internal drying function for moisture removal and mildew prevention.
Procedure for locking and unlocking the control panel to prevent unintended operation.
Instructions on how to remove and empty the water tank when it is full, including handling the float and cover.
Guidance on connecting a continuous drainage pipe to avoid frequent tank emptying.
Information on using air purifier functions and how to clean the air filters, including mesh and activated carbon filters.
