Low Dehumidifying / Maintenance Mode
Press MODE key to select the low dehumidifying mode
In low dehumidifying mode the unit will run with the low fan speed.
Air purifier
Press the MODE key to select the air purifier mode. In this mode the unit runs
at a slow fan speed as default. Pressing the HUMIDITY key allows you to adjust
fan speeds.
Internal Drying function
When the unit has been running in an environment with a high humidity for a
long time, or when putting the unit into storage, you can press the DRYING key
to remove any internal water / moisture. This helps to avoid issues mildew and
prolong the life of the unit.
Once you have run the unit through drying mode run it the high fan speed for 1
hour.
How to stop the DRYING mode?
1. Press the DRYING key again to cancel the drying function. The unit will
be returned to previous operation mode before DRYING mode was
selected.
2. Press the POWER key to stop the drying function. The unit will stop
running.
Keypad locked function
1. Press the LOCK key for 3 seconds and control panel will lock
2. Press LOCK again for 3 seconds and normal operation will resume
3. The LOCK icon will appear on the LCD screen if the control panel is
locked.
12
To Next Page
Loading...
Need help?
General
