EasyManua.ls Logo

ElectrIQ CD20LE - Operating the Dehumidifier; Timer Settings (On;Off); Dehumidifying Mode Selection

ElectrIQ CD20LE
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
Timer-off setting
Press the TIMER key (while the unit is on) to set the unit to switch off after a
selected amount of time.
will flash for 5 times and disappear when your first press the TIMER key.
Each press of the button increased the time in increments of 1 hour.
Time-on setting
Press the TIMER key (while the unit is off/standby) to set the unit to switch on
after a selected amount of time.
will flash for 5 times and disappear when your first press the TIMER key.
Each press of the button increased the time in increments of 1 hour.
Auto Dehumidifying
Press MODE to select the auto dehumidifying mode with a relative humidity of
50% as default.
If the room humidity rises to more than 5% of the humidity set on the
unit it will begin to run at the high fan speed.
If the room humidity is around the set humidity level the unit will run
at the low fan speed.
If the room humidity drops to less than 5% of the humidity set on the
unit the auto dehumidifying mode will be switched off and the unit will run at
the low fan speed only.
High Dehumidifying / Laundry Mode
Press the MODE key to select the high dehumidifying mode
In high dehumidifying mode the unit will run with the high fan speed.
11

Related product manuals