To Next PageTo Next PageWhat does error code E3 or E4 mean on my ElectrIQ CD20LE?
Error codes E3 or E4 indicate a humidity sensor error. Use the unit within the prescribed humidity range. Unplug the unit, let it rest, and plug it back in. If the error repeats, call the service center.
What does error code E1 or E2 mean on my ElectrIQ Dehumidifier?
Error codes E1 or E2 indicate a temperature sensor error. Use the unit within the prescribed temperature range. Unplug the unit, let it rest, and plug it back in. If the error repeats, call the service center.
What does error code E5 or E6 mean on my ElectrIQ CD20LE Dehumidifier?
Error codes E5 or E6 indicate an abnormal coil sensor temperature or current. Use the unit within the prescribed humidity and temperature range. Unplug the unit, let it rest, and plug it back in. If the error repeats, call the service center.
Why does my ElectrIQ Dehumidifier stop regularly and show the defrost light?
The defrost light indicates that the unit is automatically defrosting. Allow the unit to complete this process. If this occurs frequently, try increasing the room temperature.
What does the tank full red light mean on my ElectrIQ Dehumidifier?
The tank full red light indicates that the water tank is full or not correctly positioned. Empty the tank and ensure it is properly placed back in the unit.
Why ElectrIQ CD20LE defrost light on and unit stops regularly?
If the defrost light is on and your ElectrIQ dehumidifier stops regularly, it's likely defrosting. Allow the unit to automatically defrost itself. If this happens too often, increase the room temperature.
Why is my ElectrIQ Dehumidifier not extracting water?
Your ElectrIQ Dehumidifier might not be extracting water for several reasons. Make sure the humidity level setting is lower than the current humidity in the room. Also, check if the temperature is too low for efficient water extraction; if so, increase the room temperature or reposition the unit. Finally, ensure that no intake grill or outlet is blocked and that the unit is at least 20 cm away from walls.
General| Brand | ElectrIQ |
|---|---|
| Model | CD20LE |
| Category | Dehumidifier |
| Language | English |
Tips for saving energy and protecting the unit during operation, covering airflow, filter maintenance, and placement.
Instructions for setting the unit to high or low dehumidifying modes using POWER and MODE buttons.
Guide on setting specific humidity levels using POWER, MODE, and HUMIDITY buttons.
Explanation of the function of each button on the control panel, including POWER, MODE, TIMER, HUMIDITY, DRYING, SWING, LOCK, IONISER.
Description of various icons and indicators displayed on the unit's LCD screen for different modes and statuses.
Instructions for setting the unit to switch off or turn on automatically after a specified time duration.
Details on Auto, High, and Low dehumidifying modes, including fan speed adjustments based on room humidity.
Guide to using the air purifier mode and the internal drying function for moisture removal and mildew prevention.
Procedure for locking and unlocking the control panel to prevent unintended operation.
Instructions on how to remove and empty the water tank when it is full, including handling the float and cover.
Guidance on connecting a continuous drainage pipe to avoid frequent tank emptying.
Information on using air purifier functions and how to clean the air filters, including mesh and activated carbon filters.
