EasyManua.ls Logo

Electro-Voice EVID 4.2 - User Manual

Electro-Voice EVID 4.2
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner’s Manual
Owner’s Manual

Other manuals for Electro-Voice EVID 4.2

Preview: Installation Manual
Installation Manual20 pages

Questions and Answers

  • A
    Alyssa KellyAug 10, 2025
    What to do if my Electro-Voice EVID 4.2 have no sound because of wiring?
    • A
      Anthony GillespieAug 10, 2025
      If your Electro-Voice Speakers have no sound, and you suspect the wiring, verify that you have connected the correct wire pairs to the amplifier. Play something at a low level through the amplifier, for example, from a CD player or tuner. Connect a test speaker in parallel with the malfunctioning line. If the sound is gone or very weak, the line has a short in it, possibly a severe scrape, pinch, or staple puncture. If the sound level is normal, the wire is open, possibly a cut wire or missed connection. Using the test speaker, move down the line, and test each connection until you find the problem, and correct it. Observe proper polarity.
  • O
    Olivia BrownAug 25, 2025
    How to troubleshoot Electro-Voice EVID 4.2 with no sound due to the amplifier?
    • J
      Jesus SmithAug 26, 2025
      To troubleshoot Electro-Voice Speakers with no sound, start by connecting a known working test speaker to the amplifier outputs. If there is no sound, check that all electronics are on, the signal routing is correct, the source is active, and the volume is turned up. Correct, repair or replace the amplifier as necessary. If there is sound, the problem is in the wiring.

Electro-Voice EVID 4.2 Specifications

General IconGeneral
Max. SPL/1m (calc)111 dB
Impedance8 Ohms
LF Transducer4" (100 mm) woofer
Coverage (Nominal -6 dB) H120°
Coverage (Nominal -6 dB) V100°
TypeFull-range
Minimum Impedance6 Ω
HF Transducer0.75" (19 mm) tweeter
Woofer MaterialPolypropylene
Enclosure MaterialABS
Mounting Optionsbracket

Related product manuals