18
Quick setup
RE3 UHF
-12 | 01 | F.01U.362.808 Installation manual Electro-
a. While viewing receiver AF meter activity, perform as you would in a normal performance
using proper microphone placement.
b. Observe the AF meter LED segments. Ideal level should show all green LEDs and the
yellow LED lit on emphasis peaks. An occasional red LED is OK, but a constant, solid red
LED should be avoided.
c. Adjust transmitter input sensitivity until item b above is achieved.
Upon successful completion of this section, your set is ready for operation.
To Next Page
Loading...
Need help?
General
