Need help?Do you have a question about the Electro-Voice R300HDC and is the answer not in the manual?
General| Modulation | FM |
|---|---|
| Element | Dynamic |
| Polar Pattern | Cardioid |
| Output Connector | XLR |
| Impedance | 600 Ohms |
| Color | Black |
| Type | Handheld |
Steps for setting up the R300 wireless receiver, including connections and power.
Steps for setting up the R300 wireless transmitter, including batteries and synchronization.
Instructions for operating the R300 system, adjusting gain, and confirming audio output.
Identifies and describes controls and connectors on the R300 receiver unit.
Details receiver setup, antenna placement, and channel change procedures.
Explains the elements and controls of the receiver's main display screen.
Identifies controls and indicators on the HT-300 handheld transmitter.
Guides on battery insertion, power, and reception for the handheld transmitter.
Identifies controls and indicators on the BP-300 bodypack transmitter.
Details battery insertion, power, and gain settings for the bodypack transmitter.
Requirements for matching frequency bands and channels for system compatibility.
Advice on coordinating multiple R300 systems and other wireless gear.
Lists electronic devices and factors causing interference with the wireless system.
Advises using quality batteries and proper placement for optimal performance.
Specifies recommended minimum distances between transmitters, receivers, and antennas.
Possible causes and solutions for no audio or display on the receiver.
Troubleshoots missing audio, RF signal, and low/no audio output issues.
Provides solutions for audio distortion and RF interference.
Troubleshoots limited range, intermittent signal, and RF interference.
Explains how to resolve issues with changing receiver settings and transmitter sync.
How to ensure the R300 system's frequency band is suitable for your location.
Information on available online materials and how-to videos for the R300 system.
Guidance on operating multiple systems and mixing frequencies/bands.
Explains interference causes and defines line-of-sight for wireless systems.
Discusses limitations and requirements for relocating receiver antennas.
EZsync port location and troubleshooting tips for syncing difficulties.
Lists available accessories and parts for the R300 system with model and order numbers.
Details compatible channel frequencies for Band A, organized into four groups.
Lists compatible channel frequencies for Band B, organized into four groups.
Presents compatible channel frequencies for Band C, organized into four groups.
Details compatible channel frequencies for Band E, organized into four groups.
Provides technical details for the R300 receiver, including frequency range, sensitivity, and dimensions.
Details audio performance metrics and specifications for BP-300 and HT-300 transmitters.
Outlines certifications and compliance statements with FCC and ETSI standards.
Clarifies user responsibility for licensing and operation of the equipment.
Provides contact information and instructions for factory service in North America.
Offers contact details and shipping instructions for factory service in Europe.
Directs users to the website for current limited warranty information.
To Next Page