Electro-Voice R300HDC - FREQUENTLY ASKED QUESTIONS; Frequency Band Suitability and Location; Online Resources and How-To Videos; Operating Multiple Systems and Mixing Bands

24
05
FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions
Q: How can I make sure my R300 system’s frequency band will work in my location?
A: If you will be using your system in the USA, you can check R300 compatibility in your location by using the frequency band
selector located at http://www.electrovoice.com/frequencyselector. If you are outside of the USA, please contact your local
Electro-Voice dealer or technical support center.
Q: Are there any web-based materials or how-to’s available which will help me understand my R300 system?
A: R300 how-to videos are posted at http://www.electrovoice.com/evtv.php?category=knowledge
Q: How many R300 systems can I operate at the same time?
A: The number of R300 systems you can operate simultaneously is completely dependent on your local RF (radio frequency)
conditions. Under ideal RF conditions (meaning there are no other sources of RF operating within or near your system’s
bandwidth), the maximum number of simultaneous R300 system within one tuning bandwidth is limited to 8 channels within
ONE channel group. However, local television broadcasts or other wireless systems operating within your system’s tuning
bandwidth will reduce that number.
Q: Can I mix frequencies from different groups?
A: No. Multi-channel R300 systems in the same bandwidth (A, B, C, or E) must operate within the same channel group.
Only frequencies within the same group are inter-modulation free. Frequencies from different groups may interfere with one
another.
Q: Can I use R300 systems from different bands at the same time?
A: Yes. Mixing systems from different bands is possible as long as you follow the group coordination guidelines of each band.