Electro-Voice RE3 Series Installation Manual

22
en |
RE3-RX receiver
RE3 UHF
Wireless
2018
-12 | 01 | F.01U.362.808 Installation manual Electro-
Voice
7.2 LCD display
ID
Item
Description, usage and notes
a
Antenna status
icon
indicates the diversity circuit is choosing antenna A signal at the
moment.
indicates the diversity circuit is choosing antenna B signal at the
moment.
indicates there is no antenna signal present for the diversity circuit
to choose.
b
Audio output
volume level
Displays the receiver audio output volume level. Menu item adjustment
allows settings between 0dB to -50dB in 1dB increments. Beyond -50
is MUTE.
c
Transmitter activity
status
Displays the following possible transmitter audio states:
LIVE indicates mated transmitter audio is live and present at the
receiver.
MUTE indicates mated transmitter is in mute mode.
NoSYNC indicates no synced transmitter is on.
d
Mated transmitter
battery status icon
Indicates the synced transmitter’s battery life.
= between 40% and 100% charge remains.
= between 20% and 39% charge remains.
= between 10% and 19% charge remains.
= below 10% charge remains. Low Battery begins flashing on
display.
= no battery info present.
e
KeyLock mode
icon
Indicates receiver KeyLock mode is on. Icon disappears from display
when off. See turning on and off KeyLock below.
f Frequency in MHz
The portion of the receiver’s tuned frequency to the left of the decimal
in millions.
g Frequency in kHz
The portion of the receiver’s tuned frequency to the right of the decimal
in thousands.
h
Group number
The group number of the receiver’s tuned frequency.
i
Channel
The channel number of the receiver’s tuned frequency.
7.3 RE3-RX setup menu

Electro-Voice RE3 Series Specifications

General

Brand	Electro-Voice
Model	RE3 Series
Category	Microphone
Language	English