EasyManua.ls Logo

Electrolux 6653 - Page 9

Electrolux 6653
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USING THE OVEN
3
USING THE OVEN
9
Setting the cooking time
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The oven indicator light will glow and the
heating source will come on.
3. Press “COOK” button, then set the required cooking duration by using the “-” and “+”
buttons. After 4 seconds the time of day and “A” will display with the cook symbol .
NOTE: Do not forget to add preheating time if necessary.
Setting the cooking stop time
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperatures. The oven indicator light will glow and the
heating source will come on.
3. Press the “STOP” button, then use the “-” and “+” buttons to enter the time of day you want
to finish cooking. After 4 seconds the time of day and “A” will display with the cook symbol .
NOTE: Do not forget to add preheating time if necessary.
Setting the delayed start cooking time
1. Program the “cooking time” and “cooking stop time” as described in the relevant sections.
After 4 seconds the time of day and “A” will display, but the cook symbol will not display
until the oven automatically turns on.
On completion of cooking
The heat source will turn off, the timer will beep, the cooking symbol will disappear, and the
“A” symbol will flash.
1. Turn the function and temperature controls to the off position.
2. Press the “TIMER” or “STOP” buttons to stop the timer from beeping.
3. To return the appliance to manual operation press the “COOK” and “STOP” buttons together.
To check your cooking settings
1. Press “COOK” button. The cooking duration will show on the timer display.
2. Press “STOP” button. The finish time will be display on the timer.
To cancel your cooking settings
1. Press the “COOK” and “STOP” buttons together to revert back to manual operation.
2. Then turn both the function and temperature selectors back to the off position.
NOTE: The pitch of the beeper can also be adjusted by holding the “-” button for a few seconds
until the desired tone is heard.

Related product manuals