Need help?Do you have a question about the Electrolux Affinity and is the answer not in the manual?
General| Dryer Drum Material | Stainless Steel |
|---|---|
| Energy Star Certified | Yes |
| Wrinkle Guard Option | Yes |
| Moisture Sensor | Yes |
| Control Type | Electronic |
| Color | White |
| Fuel Type | Electric |
| Capacity | 7.0 cu. ft. |
| Drying Cycles | Delicates, Heavy Duty, Quick Dry, Timed Dry |
Procedure for removing the detergent dispenser drawer.
Steps to remove the washer's main top panel.
Instructions for removing the control console assembly.
Guide to removing the electronic control module.
Steps for removing the pressure switch.
Procedure for removing the vent tube and water valve grommet.
Instructions for removing the vent tube.
Guide to safely removing the water inlet valve.
Overview of the water valve and its connections.
Explanation of water valve functions and ports.
Details on the dispenser and its main fill function.
Instructions for disconnecting hoses and removing the dispenser.
Procedure for removing the rear access panel.
Guide to accessing the heater and thermistor.
Instructions for replacing the heating element.
Steps for removing and replacing the drive belt and pulley.
Guide to removing the drive motor.
Instructions for removing the motor control board.
Procedure for removing the light switch.
Steps to remove the spring holding the door bellows.
Guide to removing the door switch.
Instructions for removing the front access panel.
Procedure for removing the door bellows (boot).
Steps for correctly installing the door bellows (boot).
Guide to removing the machine's counter weight.
Instructions for removing the drain pump.
Procedure for removing the suspension shocks.
Steps for accessing the outer tub and spin basket.
Procedure for entering the washer's diagnostic test mode.
Overview of available diagnostic tests and their functions.
List of error codes, descriptions, and related tests.
Common error codes displayed to the customer.
Detailed step-by-step troubleshooting tests for various issues.
Method for retrieving stored error codes from the unit.
Procedure to clear stored error codes after repairs.
Explanation and procedure for activating the unit's demo mode.
To Next Page
