Electrolux Affinity - Error Codes

Error Codes
Error Code
Error Code Description
Test
E11
Water fill exceeded allowed time
limit
Refer to test (1).
E13
Water leakage
Refer to test (2).
E21
Water not pumping out quickly enough
Refer to test (3).
E31
Pressure switch failure
Refer to test (4).
E32
Pressure switch calibration problem
Refer to test (4).
E35
Pressure switch senses water overfill
Refer to test (5).
E38
Air trap clogged
Refer to test (5).
E41
Main control board senses the door switch is
open
Refer to test (6).
E43
Door PTC circuit failure
Refer to test (15).