Electrolux Affinity - Page 55

Error Codes
E44
Door closed sensing failure
Replace the main control board.
E45
Line door sensing failure
Replace the main control board.
E47
Door PTC sensing open
Refer to test (7).
E48
Door PTC sensing closed
Refer to test (7).
E49
Door sensing incongruence failure
Refer to test (7).
E4A
Door PTC sensing failure
Refer to test (6).
E52
Incorrect signal from tachometer
Refer to test (8).
E53
Low voltage to motor control board
Refer to test (17).
E54
Motor over speed failure
Refer to test (9).
E55
Motor under speed failure
Refer to test (9).