Step 8 After cleaning, do the above steps in the opposite sequence.
Step 9 Install the smaller panel first, then the larger and the door.
Step 10 Make sure that you put the glass
panels (C, B and A) back in the cor‐
rect sequence otherwise the surface
of the door may overheat. First, in‐
sert panel C, which has a square
printed on the left side and a triangle
on the right side. You will also find
those symbols embossed on the
door frame. The triangle symbol on
the glass must match the triangle on
the door frame, and the square sym‐
bol must match the square. After that
insert the other two glass panels.
11.6 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Before you replace the lamp:
Step 1 Turn off the oven. Wait until the oven is cold.
Step 2 Disconnect the oven from the mains.
Step 3 Put a cloth on the bottom of the cavity.
41/56
CARE AND CLEANING
To Next Page
Loading...
