Error codes
Err F102 The door lock is not broken.
00:00 There was a power cut. Set the time of day.
If the display shows an error code that is not in this table turn the house fuse off and on to restart
the oven. If the error code recurs contact an Authorised Service Centre.
Cleaning
Problem Check if...
The water leaks out of the cavity embossment. There is too much water in the cavity emboss‐
ment.
12.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
13. ENERGY EFFICIENCY
13.1 Product Information and Product Information Sheet*
Supplier's name Electrolux
Model identification
CKH8000X 944032018
CKP826X 944032016
COP825X 944032021
79/208
ENERGY EFFICIENCY
To Next Page
Loading...
