9
.
Troubleshooting
The vacuum cleaner does not start
• Check that the cable is connected to the
mains.
• Check that the plug and cable are not
damaged.
• Check for a blown fuse.
Poor suction or the vacuum cleaner stops
• Is the dust container full?
• Is the nozzle or air channel blocked?
• Is the filter blocked or needs to be
cleaned?
If water has entered the vacuum cleaner
It will be necessary to replace the motor at
an authorised Electrolux service centre.
Damage to the motor caused by the
penetration of water is not covered by the
warranty.
Customer Information
Electrolux decline all responsibility for all
damages a rising from any improper use or
in cases of tampering with the appliance .
This product is designed with the
environment in mind. All plastic parts are
marked for recycling purposes .
If you can not find filter or accessories to your
Electrolux vacuum cleaner, please visit our website at
www.electrolux.com .
GB
To Next Page
Loading...
