To Next PageTo Next PageWhy Electrolux PURE D9 has reduced suction?
A reduction in suction capacity in your Electrolux Vacuum Cleaner may occur if the s-bag is full or blocked. Also, the motor filter may be clogged and needs changing. Check if the nozzle or the hose is blocked.
What to do if my Electrolux PURE D9 does not start?
If your Electrolux Vacuum Cleaner isn't starting, here are a few things to check: * Make sure the power cable is securely plugged into the mains. * Inspect the cable and plug for any signs of damage. * Check your home's fuse box to see if a fuse has blown. * If your model has a remote control handle, see if the battery indicator light is on.
Why does my Electrolux PURE D9 Vacuum Cleaner stop working?
Your Electrolux Vacuum Cleaner might stop working because it's overheated. Disconnect it from the power outlet and check for blockages in the nozzle, tube, hose, or filters. Allow the cleaner to cool down for 30 minutes before plugging it back in. If it still doesn't work, contact an authorized Electrolux service centre.
Why does my Electrolux Vacuum Cleaner keep stopping?
If your Electrolux Vacuum Cleaner stops working, it might be overheating. Disconnect it from the power outlet and check for any blockages in the nozzle, tube, hose, or filters. Allow the appliance to cool down for about 30 minutes before plugging it back in. If it still doesn't operate after cooling, contact an authorized Electrolux service center.
How to fix Electrolux PURE D9 filter indicator light?
If the filter indicator light is illuminated on your Electrolux Vacuum Cleaner (specific models only), you should change, or wash (if washable), the exhaust filter.
Why is the s-bag indicator light on my Electrolux PURE D9 Vacuum Cleaner illuminated?
If the s-bag® indicator light is illuminated on your Electrolux Vacuum Cleaner, it could mean a couple of things: * The s-bag® might be full or blocked. Check and replace if necessary. * If you've already replaced the s-bag®, it might be time to change the motor filter.
What to do if Electrolux PURE D9 Vacuum Cleaner sucked up water?
If water has been sucked into the Electrolux Vacuum Cleaner, the motor needs to be replaced at an authorized Electrolux service center. Note that damage to the motor caused by water is not covered under warranty.
What does it mean when the s-bag indicator light is on Electrolux Vacuum Cleaner?
If the s-bag indicator light is illuminated on your Electrolux Vacuum Cleaner, it means that the s-bag is either full or blocked. If you've already changed the s-bag, consider changing the motor filter as well.
What to do if filter light is on Electrolux PURE D9 Vacuum Cleaner?
If the filter indicator light is illuminated on your Electrolux Vacuum Cleaner (only at specific models), you should change the exhaust filter, or wash it if it's washable.
What to do if s-bag light is on Electrolux PURE D9?
If the s-bag indicator light is on in your Electrolux Vacuum Cleaner, check to see if the s-bag is full or blocked. If you've already replaced the s-bag, consider changing the motor filter.
General| Suction power | 550 AW |
|---|---|
| Maximum input power | 650 W |
| Annual energy consumption | 21.3 kWh |
| Cord length | 9 m |
| Dust container full indicator | Yes |
| Type | Cylinder vacuum |
| Cleaning type | Dry |
| Dust capacity | 5 L |
| Product color | Rose |
| Tube material | Aluminum |
| Wheels material | Rubber |
| Number of wheels | 2 wheel(s) |
| Dust container type | Dust bag |
| Proper use | Home |
| Noise level | 69 dB |
| Cleaning surfaces | Hard floor |
| Dirt separating method | Filtering |
Weight and Dimensions| Depth | 510 mm |
|---|---|
| Width | 305 mm |
| Height | 240 mm |
| Weight | 7750 g |
