5
Unpacking and assembly (1)
• Check that all parts are in the box.
• Carefully insert the upper stick into the
lower main body (1a). Make sure that the
cable does not jam.
• Secure the upper stick by tightening the
locking screw (1b).
• Fit the floor nozzle towards the vacuum
cleaner.
Starting to vacuum clean
• Release the cable by rotating the upper
cable holder (2), and plug the cable.
• Start / Stop (3a).
1; Off
2; On
• Start / Stop (3b)*
1; Off
2; Medium power
3; Maximum power
Floor nozzles (4)
Carpet / Hard floor nozzle (4a)
Carpets: Use with the lever in position (A).
Hard floors: Use with the lever in position (B).
Parquet nozzle (4b)*
Use for wooden floors.
* = Certain models only.
1
2
4a
1
2
3
3a
3b*
1a
1b
1
2
1
2
4b*
GB
To Next Page
Loading...
