7
Using the Extension tube :
Connect the nozzle to the extension tube (5)
for cleaning under beds & furniture
Hose & Accessories *
Remove the floor nozzle and secure the
shoulder strap* around the nozzle connection
and the upper stick, as shown on the image
(6).
Fasten the hose towards the nozzle
connection and connect the accessories*.
Cleaning the filters and dust container
Dynamica's dust container must be emptied
regularly, plus dust container and filters need
to be cleaned to maintain a high suction
power.
Clean the filters every third emptying or when
Dynamica has low suction power Make sure
parts are dry before reassembling.
7 Release the whole dust container by
pushing the release button.
8 Take out both filters.
9 Empty the content into a wastepaper
basket.
10 Separate filters Shake them clean or rinse
separately using warm water. Make sure
filters are dry before reassembling in
reverse order.
11 Put the filters back and press back the
dust container in reverse order.
* = Certain models only.
7
8
5
6
9
10
11
GB
To Next Page
Loading...
