EasyManua.ls Logo

Electrolux EASC12F2MBKLW - Maintenance

Electrolux EASC12F2MBKLW
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
then dry.
6. Clean the support frame using a
vacuum cleaner or water. After,
dry for a couple of hours or until
dry.
7. Insert the fresh air filter in its
original place.
8. Insert the high part of the air
filter (fresh air filter + Support
frame) again in the unit keeping
in mind that the outside border
(right and left) are lined up
correctly, now place the whole
filter in the initial position.
Maintenance
If you plan to idle the unit for a long
time, perform the following:
1. Operate the fan for about half a day
to dry the inside of the unit.
2. Stop the air conditioner and
disconnect power. Remove the
batteries from the remote controller.
3. The outdoor unit requires periodic
maintenance and cleaning. Do not
attempt to do this yourself. Contact
your dealer or servicer.
Checks before operation
1. Check that the wiring is not broken
off or disconnected.
2. Check that the air filter is installed
3. Check if the air outlet or inlet is
blocked after the air conditioner has
not been used for a long time.
Fig.2
Fig.1
Filtro
refrescante
de aire
Fig.3
Fig.4
Fig.5
Soporte
del marco
Filtro
refrescante
de aire
Filtro
refrescante
de aire
Soporte del marco
Soporte del marco
49 electrolux maintenance
maintenance electrolux 50

Related product manuals