6
• Do not remove, tamper with or make illegible the safety, danger and
instruction signs and labels on the machine.
AA..44 GGeenneerraall ssaaffeettyy rruulleess
Protection devices installed on the machine
• The guards on the machine are:
– fixed guards (e. g. casings, covers, side panels, etc.), fixed to the
machine and/or frame with screws or quick-release connectors that
can only be removed or opened with tools;
– interlocked movable guards (door) for access inside the machine;
– machine electrical equipment access doors, made from hinged
panels openable with tools. The door must not be opened when the
machine is connected to the power supply.
Safety signs to be placed on the machine or near its area:
PPrroohhiibbiittiioonn MMeeaanniinngg
do not remove the safety devices
do not use water to extinguish fires (placed on
electrical parts)
DDaannggeerr MMeeaanniinngg
danger of burns
danger of electrocution (shown on electrical
parts with indication of voltage)
End of use
• When the appliance is no longer to be used, make it unusable by
removing the mains power supply wiring.
Instructions for use and maintenance
• Risks mainly of a mechanical, thermal and electrical nature exist in the
machine. Where possible the risks have been neutralised:
– directly, by means of adequate design solutions.
– indirectly by using guards, protection and safety devices.
• Any anomalous situations are signalled on the control panel display.
To Next Page
Loading...
