8.4.6. Service menu / Extra rinse
w
No additional dishwashing process has been selected ex works.
w
w
This results in the program running times being prolonged by max. approx. 10 minutes..
w
w
2.
Ä
Scroll through to the extra rinsing service option with the option button.
Ä
Service option is shown in the text line of the display.
Ä
(example "
")
Ä
The text part "6 EXTRA RINSE" is illuminated, the setting "OFF" flashes.
3.
Ä
Ä
4.
After the button has been pushed for the last time, the service menu can be quitted as follows.
w
w
w
...by pressing the Reset button, the function is quitted and "SELECT
PROGRAM" appears in the text field of the display
or this occurs should no button be pressed within 60 seconds
or the dishwasher is deactived with the On/Off button.
If the function is activated, an additional dishwashing process is generally included
with the exception of the dishwashing program "Pre-Rinse".
This additional dishwashing will be repeated until the function is deactivated in the
service mode again.
This means that this service function differs from the program option "Extra
Rinsing", with which the customer can deselect the additional rinsing
process at any time whatsoever.
The option can now be added on "ON" or deactivated "OFF" each time the
Ok/Start button is pressed.
The text part "6 EXTRA RINSE" is illuminated, the setting
"ON" or "OFF" flashes.
1.
3.
2.
OK / START
4.
RESET
oder automatisch nach 60sek.
OPTION
OK / START
To Next Page
Loading...
