EDW500
Technical Support – RA
Chapter
3
EDW500
Styling Overview
Location of LEDs, Rotary and Push Buttons
Reset
There are variants of EDW500 models which have only 1 button.
For these single-button models, press and hold the single button to
reset.
Access Service Mode
The Service Mode can only be accessed after the Reset function
has been carried out and the appliance is switched off.
When machine is off, press and hold S1 while switching the
appliance on by turning the rotary to the 1
st
position on the left (P3),
keep holding the buttons for 4 seconds.
L1 and L2 blink to indicate that Service mode is accessed.
L2
S2
To Next Page
Loading...
