8
Position the new charcoal lter in the
position marked and while holding
the lter replace the xing hooks as
illustrated.
This appliance can be a possible re
hazard if the grease and charcoal
lters are not cleaned and replaced as
recommended.
Changing the Light Bulb
20 W halogen light
Remove the snap-on lamp cover by
levering it from under the metal ring,
supporting it with one hand.
Remove the halogen lamp from the lamp
holder by pulling gently.
Replace the lamp with a new one of the
same type, making sure that you insert
the two pins properly into the housings on
the lamp holder.
Replace the snap-on lamp cover.
Replacement lters and light bulbs can be
obtained from your local Service Force Centre.
To Next Page
Loading...
