electrolux 9
EN
Changing the Light Bulb
If a lamp fails to function at any time
fi rst check that it is fully screwed into
the holder. To tighten the lamps turn
clockwise, but ensure not to over
tighten them and break the lens.
When changing the lamps an identical
replacement must be fi tted to ensure
the safe working of the cooker hood.
The replacement lamp is specifi ed 220-
240 volt 40 watt clear cylindrical shape
lens with a small Edison (E14) screw
thread.
Replacement fi lters and lamps bulbs
can be obtained from your local Service
Force Centre.
To Next Page
Loading...
