15
USER INTERFACE
Refrigerator
temperature
scale icons
Boost on/off
icon
Temperature
adjust
Refrigerator
indication
icon
Compartment
select button
Controls – ETE4600 & EBE4500 Models
DESCRIPTION
Boost on/ off icon • Indicates the status of the Boost function.
Boost button Use the Boost function when you add a large amount of food to the freezer or
refrigerator compartments.
• Press the ‘Boost’ button. The Boost icon will ash indicating that the Boost mode is
active the compressor will run continuously and refrigerator will be set to 2°c.
• Top mount models the refrigerator and freezer will return to normal mode after 90
minutes.
• Bottom mount models the refrigerator and freezer will return to normal mode after
26 hours
• The Boost function can be can
celled anytime by pressing the button again.
Refrigerator / Freezer
temperature scale icons
• Indicates the temperature setting of the refrigerator compartment.
• Indicates the temperature setting of the freezer compartment.
Temperature adjust button • Touch any button to awaken control.
• Touch the ‘Temp’ button to decrease the selected compartment temperature. Once
the coldest temperature is reached the display will return to the warmest setting
with the next press.
Refrigerator/Freezer
indication icon
• Indicates the selected zone.
Compartment select button • Press
to select the desired compartment.
• The refrigerator / freezer indication icon will show which zone is selected.
IMPORTANT
The factory default settings for the refrigerator is “3°C” and “-18°C” for the freezer. If you want to change the temperature,
remember to make only small adjustments and wait 24 hours to see if it’s correct.
ABOUT THE USER INTERFACE
To Next Page
Loading...
