Electrolux EHS6610X - Child Safety Device; Activating Child Safety; Overriding Child Safety; Deactivating Child Safety

8
Using the child safety device
The child safety device prevents unintentional use of
the appliance.
Activating the child safety device
3 To override the child safety device or switch it
off sucessfully, the steps must be performed
immediately one after the other.
No other sensor fields must be touched be-
tween the steps described. If the steps are
performed in the wrong order, the display au-
tomatically switches itself off.
Overriding the child safety device
The child safety device can be released in this way
for a single cooking session; it remains activated af-
terwards.
Deactivating the child safety device
Step Control panel Display
1.
Switch on the appliance (Do not set a heat
setting)
¾ / h (if hot)
2.
Touch of the front right cooking zone and
at the same time
4 x
¾ or h
Decimal points flash
3. Touch of the front right cooking zone l
Appliance switches off.
Step Control panel Display
1.
Switch on the appliance l / h (if hot)
2.
Touch of the front right cooking zone and
at the same time
4 x
¾ Decimal points flash
Until the appliance is next switched off, it can used as normal.
Step Control panel Display
1. Switch on the appliance
l / h (if hot)
2.
Touch of the front right cooking zone and
at the same time
4 x
¾ or h
Decimal points flash
3. Touch
Appliance switches off.