9
Safety cut-out
Cooking surface
• If after switching on the appliance a heat setting is
not set for a cooking zone within approx. 10 sec-
onds, the appliance automatically switches itself
off.
• If one or more sensor fields are touched for longer
than approx. 10 seconds, the cooking surface is
automatically switched off. ER03 flashes on the
display or changes to h if there is still residual
heat.
• If all cooking zones are switched off, the cooking
surface automatically switches itself off after ap-
prox. 10 seconds.
Control panel
3 Moisture (e.g. a wet cloth) or liquid boiling over
onto the control panel switches all cooking
zones off.
Cooking zones
• If one of the cooking zones is not switched off after
a certain time, or if the heat setting is not modified,
the relevant cooking zone switches off automati-
cally. h is displayed.
Heat setting Switches off after
1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours
To Next Page
Loading...
