Controls
WaveoTouch TM (some models)
Your refrigerator is equipped with a Wave-Touch TM
Panel user interface display. It is only necessary
to touch the glass. There is no need to press with
force. There are three levels of display.
1st Level: Sleep Mode
Sleep mode displays only the WATER, CUBES
and CRUSHED options. Touch an icon to activate
the desired dispenser mode. The active dispenser
mode is more brightly illuminated.
2ndLevel: Awakened Display Mode
The display is awakened by touching anywhere on
the glass where there is an indicator. Black space
will not awaken the display. After 10 seconds of
inactivity, the display will return to the Sleep mode.
The following dispenser options are illuminated:
fast ice increases the production of ice
fast freeze Activates a faster rate for freezing food
dispenserlight On/ Off
controllock Press and hold for three secondsto activate
and deactivate. This restricts undesired
changesto the refrigerators settings and
prevents use ofthe ice and water dispenser.
3rdLevel" User Variable Options
Touching the options icon displays the following
options:
vacationmode
Conservesenergy by increasingthe time
betweenautomatic defrost. This
feature is automatically activated during
long periods betweendoor openings.
Vacation mode ismanually activated when
the red indicator is lit.
water filter
Touchto display filter condition status.
Press and hold for three secondsto reset.
air filter
Touchto display filter status. Pressand
hold for three seconds to reset.
temp display When active, it allows the display of the
freezerand fridge temps during "Sleep
Mode". Thetemperature is displayedwhen
the red indicator is lit.
temp mode Touchto toggledisplayfrom Fahrenheitto
Celsius.
mutesounds
factory default
onoff
Tonesemitted by each keypresscan be
turned off based on user preference.The
sounds are muted when the red indicator is
lit. Warning signals will stay active.
Resetsall refrigerator settings such as
temp, temp display, and alarm tones to
their factory default settings.
Press and hold for three secondsto turn off
the cooling system to cleanthe refrigera-
tor. It also turns off all dispenser functions.
Thetemperature display will read OFF.
Setting cooling temperatures
1 Touch the glass panel to illuminate the 2 nd
level of display.
2 Select the options icon. Plus (+) and minus
To Next Page
Loading...
