INSTALLATIONANDSERVICEMUSTBEPERFORMEDBYAQUALIFIEDINSTALLER.
IMPORTANT:SAVEFORLOCALELECTRICALINSPECTOR'SUSE.
READANDSAVETHESEINSTRUCTIONSFORFUTUREREFERENCE.
Theelectrical requirements for this oven are 115-120 voltsAC, 15 amps or larger.
IMPORTANT-PLEASEREADANDFOLLOW
. Before beginning, please read these instructions completely and carefully
. Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the built in trim kit
Remove the turntable from the oven cavity
. Because the kit includes metal parts, caution should be used in handling and installation to avoid the possibility of injury
. Do not remove permanently affixed labels, warnings, or plates from the product This may void the warranty
. Please observe all local and national codes and ordinances
• The installer should leave these instructions with the consumer who should retain for local inspector's use and for
future reference.
PARTSINCLUDEDIN THEKITS
1)FRONTFRAMEASSEMBLY
QTY1
2) BOTTOM DUCT ASSEMBLY
QTY 1
Printed in United States
3) SCREW A (1 3A_"LENGTH)
QTY 2
4) SCREW B(1 3/4"LENGTH)
QTY 4
To Next Page
