Why is my Electrolux ELFW7537AW causing pilling on my clothes?
Pilling (fibers balling up and clinging to fabric) is normal with synthetic and permanent press fabrics due to abrasion from normal wear. Use a lint brush or shaver to remove pills.
What to do if my Electrolux Washer has water leaks?
If your Electrolux washer is leaking water, check the following: * Ensure the fill hose connection is tight at both the faucet and the washer. * Make sure the dispenser drawer is completely closed. * Inspect the water hoses for any damage, cuts, or corrosion. Replace them if necessary. Check and tighten hose connections, close the dispenser drawer completely, and replace damaged hoses.
What to do if my Electrolux Washer isn't draining properly?
If water in your Electrolux Washer does not drain or drains slowly: * Check if the drain hose is kinked or clogged; clean and straighten it. * Ensure the drain hose standpipe is not too tall; reduce its height to less than 8’ (2.4 m).
What to do if my Electrolux Washer displays a “HOSE” alarm due to incorrect wash and rinse temperatures?
If your Electrolux Washer displays a “HOSE” alarm due to incorrect wash and rinse temperatures, it means the hot and cold water hoses are connected to the wrong supply faucets. Connect the hot water hose to the hot water faucet and the cold water hose to the cold water faucet.
What causes rattling and clanking noise in Electrolux ELFW7537AW Washer?
Rattling and clanking noises in your Electrolux Washer can be caused by: * Foreign objects such as coins or safety pins in the drum or pump. Stop the washer and check the drum. If no objects are found, run a cycle with an empty drum. If the noise continues, the item may be in the pump, and you should call an authorized service technician. * Belt buckles and metal fasteners hitting the wash drum. Fasten fasteners and turn items inside out to prevent noise and damage.
What causes holes, tears, or snags in clothes washed in Electrolux Washer?
Holes, tears, or snags in clothes washed in your Electrolux Washer can be caused by: * Incorrect use of chlorine bleach. * Unfastened zippers, hooks, or buckles. * Rips, tears, and broken threads already present in the fabric. * Overloading the washer. * Degradation of the fabric. If rips, tears, and seams cannot be mended, the damage may be irreversible.
How to clean residue stain buildup in gasket of Electrolux ELFW7537AW Washer?
If you find residue stain buildup in the gasket of your Electrolux Washer, it could be due to moisture, using non-HE detergent, overdosing detergent, overloading the wash drum, leaving a wet load in the washer, or using cold water washes that don't fully dissolve detergents. To resolve this, perform a clean washer cycle. Scrub the gasket with Comet™ Spray Gel Mildew Stain Remover, using a brush to remove stains. Use only HE (high efficiency) detergent at the recommended dosage and remove the wash load immediately after the cycle is complete.
How to reduce vibrating noise from Electrolux ELFW7537AW Washer?
To stop vibrating noise from your Electrolux Washer, make sure the washer is resting firmly on the floor and adjust the leveling legs as needed. Consult the Installation sections of the manual for instructions on removing shipping bolts and the foam block, if these haven't been removed already. If the wash load is unevenly distributed, stop the washer and rearrange the load.
What to do if there's residue stain buildup in the dispenser drawer of my Electrolux ELFW7537AW Washer?
To address residue stain buildup in the dispenser drawer or if the detergent pack isn't dissolving in your Electrolux Washer, remove the dispenser and its inserts. Clean them using a mixture of ¾ cup of liquid chlorine bleach and one gallon of hot water. Rinse thoroughly and repeat if needed. Be sure to wear rubber or latex gloves and protect your floor and clothing from bleach.
What causes water leaks from Electrolux ELFW7537AW?
If your Electrolux Washer is leaking water, check the fill hose connections at both the faucet and the washer to ensure they are tight. Install the rubber sealing washers provided. Make sure the dispenser drawer is completely closed. Inspect the water hoses for any damage, cuts, or corrosion, and replace them if necessary.
General| Style | front load |
|---|---|
| Color | white; yes |
| Washer Capacity | 4.5 cu. ft. |
| Max Spin Speed | 1, 300 rpm |
| Number of Cycles | 10 |
| Temperature Settings | 5 |
| Internal Heater | yes |
| Control Panel | digital and knobs |
| Delay Start / End | yes; 1-12 hours |
| Child Lock | yes |
| Interior Light | yes |
| Steam | yes |
| Add Wash | no |
| Soak Settings | no |
| Remote Control | no |
| Wi-Fi | no |
| Annual Energy Consumption | 85 kwh |
| Annual Water Consumption | 4, 248 gallons |
| Voltage | 120 volts |
| Current | 15 |
Weight and Dimensions| Depth | 32 inch |
|---|---|
| Height | 38 inch |
| Width | 27 inch |
| Net Weight | 217 lbs |
Safety terms (Danger, Warning, Caution, Important) and general safety advice.
Protect children and safely dispose of old appliances.
Warnings on mixing chemicals and preventing injury during operation.
Prevent shock and injury, including grounding requirements.
Checklist for shipping hardware, leveling, water, drain, door, electrical, and tools.
Specific requirements for proper grounding and water supply connections.
Recommended clearances for alcoves, recesses, closets, and installation areas.
Circuit, power supply, and outlet requirements for safe installation.
Specifications for drain hose, standpipe diameter, and height.
Steps for unpacking, including safety precautions and handling instructions.
Instructions and diagrams for removing shipping bolts, spacers, and hardware.
Steps and tips for properly leveling the washer for stability and performance.
Procedure for ensuring the drain hose is correctly connected and secured.
Instructions for connecting hot and cold water hoses, including checks and tightening.
Final steps: plugging in, checking operation, and storing instructions.
Table detailing temperature, soil, spin, and option settings for 300 series cycles.
Table detailing temperature, soil, spin, and option settings for 400 series cycles.
Table detailing temperature, soil, spin, and option settings for 500 series cycles.
Troubleshooting common issues related to soil, stain removal, and lint.
Diagnosing and resolving issues related to unusual noises and vibration.
Resolving issues where the washer does not start, or water does not enter or drains slowly.
Addressing problems with water temperature, leaks, oversudsing, and incorrect connections.
To Next Page